We offer steam coils for heating and drying applications.
![standard-steam-coil standard-steam-coil](https://www.nortekair.com/wp-content/uploads/2024/06/standard-steam-coil.png)
STANDARD STEAM COIL - TYPE SS
Primary Surface
Round seamless copper tubes are mechanically expanded into the fin collars of the secondary surface. The mechanical expansion provides a permanent metal-to-metal bond for efficient heat transfer. Tubes are staggered in the direction of airflow and only RETURN BENDS are used to ensure NO reduction in tube wall thickness in the bend radius associated with hairpin tubes.
Secondary Surface
Corrugated aluminum or copper plate-type fin that is die-formed. Fin collars are full-drawn to provide accurate control of fin spacing and maximum contact with tubes.
Headers
Seamless copper with die-formed holes that provide a parallel surface to the coil tube for strong brazing joints.
Connections
Red brass Schedule 40 male pipe thread (MPT) is standard with optional copper female pipe thread (FPT) and sweat available. Maximum fin length of 108” with same end connections. Steam pressure above 50 PSIG will have opposite-end connections.
Casing
Die-formed flanges with stacking flanges on top and bottom. Same end connection coils must be mounted level (NO pitched case). Opposite end connection coils can be supplied with pitched casing. Intermediate tube supports are supplied on coils over 44” fin length with an additional support every 42”.
Testing and Performance
All coil assemblies are leak tested under water with nitrogen at 315 PSIG. Standard construction is suitable for 25 PSIG steam pressure. Heavier wall construction is available for steam pressures up to 100 PSIG.
Performance is AHRI Certified™ to Standard 410. Coil performance ratings are calculated using Temtrol AHRI Certified™ selection software.